Hilo90mhz

This is just a very brief note, mostly for my personal reference.. Tutorial: http://northernhope.blogspot.com/2013/05/stl-to-step-with-freecad.html Some additions to the above tutorial: […]

IPv4 changover is almost automatic, IPV6 must be changed by using the: Virtualmin > Addresses and Networking > Change IP […]

Place all through hole parts on PCB. Wet underside with kester 951, 959T or similar liquid flux (not sure which […]

File is located in: serverhomefolder/etc/php5/php.ini memory_limit = 128M upload_max_filesize = 50M After changing the settings you must apply them: Virtualmin/Services/Configure Website […]

Manually set in makefile for Atmega32u4 BOOT_START           = 0x7000   Manually set in makefile for […]

https://github.com/pbatard/libwdi/wiki/Signed-Driver-Walkthrough For GlobalSign make sure you have these extra certs installed: https://support.globalsign.com/customer/portal/articles/1698751-ev-code-signing-for-windows-7-and-8 This piece of information from the above link was […]

This is an absolutely great feature! wish id known about it earlier https://code.google.com/p/tinkerit/wiki/SecretVoltmeter

These battery backed SRAM and clock modules have a shelf life of 10 years, mine are at 17 years and […]